Professionally Assisted Installation Service

On an agreed date, our engineer will travel to your installation address where your assisted installation will commence on-site. After the initial survey, the engineer will help you begin the installation using their own professional tools that will be available for you to use.

How the 3 hours are structured:

1. Initial Survey: 1 hour. Evaluation of your current or proposed heating arrangement. Planning suitable pipe runs from the heat source to the manifold. Pipe sizing. Underfloor heating zones and pipe runs worked out. Electrical survey. Thermostat positions.
2. Installation: 1 hour 30 minutes. Dependant on your particular floor construction and what preparation has been advised prior to our arrival.
3. Summary: 30 minutes. Covering the set up of your system after we have gone, related paper work & warranties to ensure you are covered.
4. After sales advice and technical support.

During your 3 hour consultation we can help with:

• Advisable manifold locations
• Preferred pipe centres
• Connecting the manifold to the boiler
• How to wire in the thermostats and heating controls
• Choosing wireless or hard wired controls
• Setting up Internet thermostats
• How the system controls will work with your existing/new heating and hot water system
• Zone control
• Pressure testing and filling your system
• Advice on screeds
• Floor coverings/carpet/wood/tiles etc
• Setting the flow meters correctly
• Problems with heat outputs fixed
• Best floor setup for screed installations
• Installation of aluminium spreader plates and over joists systems
• How to lay overlay systems
• Guarantees and warranties
• Maintenance
• Chemical treatment
• and much more…

Our engineer will travel to your site anywhere in the UK and stay with you for 3 hours during which time all the important points you need to know for a successful installation will be covered to guarentee a working system that you or your customer will be happy with.

Underfloor heating in your home (or your customers home) will provide:

• Added monetary value to the property
• A more comfortable heated space
• Efficiency of your overall system
• Cost savings to your energy bill

None of the above will apply if your system is not installed correctly and there is only one opportunity to get it right. Don’t run the risk of doing a haphazard job that leaves your customer unhappy. Ensure everything is perfect with a professional grade installation that works!